Are you experiencing difficulties scanning transponders on your Matrix Burger S2 satellite receiver? Perhaps you’ve recently upgraded your firmware or are encountering issues locking onto certain channels. This guide provides a step-by-step walkthrough on how to effectively scan transponders on your Matrix Burger S2, ensuring you can access your desired satellite channels. We will address common scenarios and provide clear instructions to optimize your channel scanning process.
The need to scan transponders often arises after changes in satellite broadcasts. Providers sometimes migrate their channels to new transponders, requiring users to rescan their receivers to update channel lists. In the case of Matrix Burger S2 MPEG2 receivers, a firmware upgrade was specifically released to address compatibility issues following a transponder migration by Emtek, affecting channels like SCTV, Indosiar, and O Channel. If you find yourself unable to receive these or other channels, a proper transponder scan is essential.
Step-by-Step Guide to Scanning Transponders on Matrix Burger S2:
To initiate a transponder scan on your Matrix Burger S2, follow these simple steps within the receiver’s menu system. This process assumes you have already performed any necessary firmware upgrades, especially if you were aiming to resolve issues with specific channel reception after provider changes.
-
Access the Main Menu: Begin by pressing the “Menu” button on your Matrix Burger S2 remote control. This will bring up the main menu interface on your television screen, providing access to the receiver’s settings and functions.
-
Navigate to “Equipment” or “Installation”: Within the main menu, look for an option related to system settings or equipment setup. This is often labeled as “Peralatan” in Indonesian or might be represented by icons depicting tools or satellite dishes. In an English interface, this section is commonly named “Equipment” or “Installation”. Select this option to proceed to the satellite setup menus.
-
Select “Satellite Upgrade” or “Channel Search”: Once you are in the “Equipment” or “Installation” menu, find the option for upgrading via satellite or searching for channels. In the context of scanning transponders, you might look for terms like “Upgrade Satelit” (Satellite Upgrade in Indonesian) or “Channel Search”. Choose the option that allows you to scan for new channels or update your channel list via satellite.
-
Ensure Correct Transponder Settings: Before initiating the scan, it’s crucial to ensure your receiver is configured to scan the correct transponder. Typically, for over-the-air (OTA) upgrades or general channel scanning, you should be tuned to a transponder carrying service channels from your service provider. In some cases, like the firmware upgrade mentioned earlier, the instructions might specify tuning to the Matrix TV channel transponder for the upgrade process. For general channel scanning, ensure you have selected the correct satellite and are using appropriate transponder frequencies if manual input is required. However, for a standard scan, the receiver often automatically uses predefined transponder lists.
-
Start the Scan: After verifying the settings, locate and select the “Start” or “Mulai” (Indonesian) option to begin the transponder scan. The receiver will then start scanning for channels on the selected satellite and transponders.
-
Wait for Scan Completion: The scanning process will take some time as the receiver searches across the transponder frequencies. A progress bar is usually displayed on the screen, indicating the percentage of completion. Allow the scan to proceed until it reaches 100%.
-
Burn Flash and Automatic Restart: Once the transponder scan is complete, the receiver might initiate a process called “burn flash” or firmware writing if it detects updates during the scan (especially during an OTA upgrade). After this process, the receiver will typically restart automatically. This restart is essential for the changes to be applied.
Important Precautions During the Scan:
- Power Stability: Ensure a stable power supply throughout the entire scanning process. Power interruptions during firmware upgrades or transponder scans can potentially damage your receiver.
- Do Not Unplug: Avoid unplugging the receiver or switching off the power while the scan and burn flash processes are in progress.
- Wait for Auto Restart: Allow the receiver to restart automatically after the scan and any firmware processes are completed. Do not manually power off and on unless instructed.
Verifying Scan Results:
After the receiver restarts, navigate to the channel list to verify if the scan was successful and if the channels you were expecting to receive are now available. In the context of the Emtek channel issue, you should now be able to find and watch channels like SCTV, Indosiar, and O Channel if the firmware upgrade and scan were successful in addressing the transponder migration.
By following these steps, you should be able to effectively scan transponders on your Matrix Burger S2 receiver and keep your channel list updated with the latest broadcasts. Regular transponder scans are a part of maintaining optimal satellite TV reception, especially when providers make changes to their broadcasting parameters.
